Event ID 5774

 

 

In general, these events indicates that the machine is unable to register its records with the DNS serverSleeping half-moon it’s configured.

Possible causes:

  • An ISP’s DNS server, or the router’s IP address, is set to be used as a DNS server in NIC properties.
  • The AD zone is configured to not allow dynamic updates.
  • If the 1st DNS entry is in another site, a firewall may be blocking necessary traffic.
  • Altered default security settings on the zone.
  • Altered default security settings in AD.
  • Altered default security settings on C: drive or C:\Windows folder.
  • Antivirus not configured to allow domain communications and services exceptions. See the antivirus vendor documentation on how to configure DCs for exclusions.
  • If the zone is set to Secure Only, possible Kerberos authentication errors will prevent registration. Causes of Kerberos errors can be numerous including misconfigured time service and antivirus exclusion, using an ISP’s DNS, third party installed firewalls or AV, and more.

Note on Firewalls

Active Directory communications require over 29 ports to be allowed, plus the ephemeral ports, and differ among operating system versions:

  • Windows 2003, Windows XP and older: UDP 1024 – 5000
  • Windows 2008, Windows Vista, & newer: UDP 49152 – 65536

DNS updates require TCP 53 & UDP 53, not just TCP 53.
It can be extremely challenging to configure a firewall for AD communications/ General rule of thumb is to just allow all traffic between locations.

Here’s a good list of the ports:

Active Directory Firewall Ports – Let’s Try To Make This Simple (RODC, too)
http://msmvps.com/blogs/acefekay/archive/2011/11/01/active-directory-firewall-ports-let-s-try-to-make-this-simple.aspx

If you need to control the ports AD uses across a firewall:

Active Directory Replication over Firewalls
http://technet.microsoft.com/en-us/library/bb727063.aspx

Paul Bergson’s Blog on AD Replication and Firewall Ports
http://www.pbbergs.com/windows/articles/FirewallReplication.html
http://www.pbbergs.com/windows/articles.htm

Restricting Active Directory replication traffic and client RPC …Restricting Active Directory replication traffic and client RPC traffic to a … unique port, and you restart the Netlogon service on the domain controller. …
http://support.microsoft.com/kb/224196

How to restrict FRS replication traffic to a specific static port – How to restrict FRS replication traffic to a specific static port … Windows 2000-based domain controllers and servers use FRS to replicate system policy …
http://support.microsoft.com/kb/319553

 

You can run the following tests on AD to ensure there are no errors:

  • DCDIAG /V /C /D /E /s:yourDCName > c:\dcdiag.log
  • Netdiag.exe /v > c:\netdiag.log (Run only on each Windows 2003 or older DCs, not 2008 or 2008 R2)
  • repadmin.exe /showrepl dc* /verbose /all /intersite > c:\repl.txt
  • ntfrsutl ds domain.com > c:\sysvol.log

Possible solutions:

  1. On the machine logging the above event, in their TCP/IP configuration, make sure they’re not configured for the same DNS server for both Primary and Secondary.
  2. The following registry value is incorrect: “SiteCoverage” under:    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters
        This value typically should equal the domain name.
  3. You can try to flip the zone types to reset default settings.
    1. Change the zone type from Active Directory integrated to “Standard Primary”, then stop & start DNS.
    2. Then stop & start the netlogon service on the child DC & verify that the records are registered.
    3. If verified, then change the zone type back to Active Directory integrated and verify that the DC no longer records the Event log errors when the netlogon service is stopped & started.
  4. Make sure the machine logging the above event is pointing to a DNS server that support Dynamic updates and is hosting a zone for the domain (i.e. make sure it’s not pointing to the ISPs DNS server).
  5. Verify if there is no manually created CNAME, A or other record) for the same hostname. If there is, it will prevent the DCs from dynamically registering its host and you need to remove the manually created record.
  6. In a Parent – Child delegated scenario, and Event ID 5774 was logged on the domain controllers in the child domain:
        Setup:
        On the parent DNS servers, there is a delegation for the child DNS servers. The child DNS servers have forwarders up to the parent DNS servers.
        Cause and Fix:
        On the Security tab in the delegations, check if  “Authenticated Users” is missing.
        Added “Authenticated Users” and enabled Full Control.

References:

Domain Controller Generates a Netlogon Error Event ID 5774
http://support.microsoft.com/?id=284963

A DNS Update is recorded as failed: Event ID 5774, 1196, or 1578
This problem occurs when you use a third-party server application for DNS resolution. This includes SCCM causing false alarms, and cluster resources not initiating using a third party DNS server.
Hotfix available for Windows Server 2008 R2 or Windows 7.
http://support.microsoft.com/kb/977158

Event ID: 5774 Source: NETLOGON
http://eventid.net/display.asp?eventid=5774&eventno=353&source=NETLOGON&phase=1

Other References:

Technet thread: “Event 5774, NETLOGON” Friday, November 20, 2009
http://social.technet.microsoft.com/Forums/en/winserverNIS/thread/0507f7cc-c426-439b-a0c6-d36cda2dfee8

Technet thread: “Netlogon event 5774” Tuesday, February 01, 2011
http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/cf5c1e9e-dccb-45e2-9f14-144f8ba1f838/

================================================

Summary

I hope this helps with figuring out and fixing an Event ID 5774. 

Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP – Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php

This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Active Directory Firewall Ports – Let’s Try To Make This Simple

Preamble

Ace here again. I thought to clean up and re-publish my blog on AD ports requirements. Yes, they are extensive, to the dismay of the network group in your organization. But it is what it is, and it is what we need to follow to make AD work.

RPC server not available? Replication errors in the Event viewer? Sound familiar?

If so, you’ve been succumbed to the fact and realization there are possibly necessary ports being blocked causing these familiar AD communications errors. Whether between locations with firewall/VPN tunnel port blocks, Windows Firewall (which is usually not the culprit because they will auto-configure for the role of the machine and it’s current network location), or even security software or antivirus apps with some sort of “network traffic protection” feature enabled that is causing the problem.

Simply speaking, if there are replication or other AD communication problems, and you have an antivirus software installed on the endpoints or installed on all of  your DCs, disable it, or better yet, uninstall it. Uninstalling it is the best bet, so you know there are no traces of other subcomponents that are active that may still be causing the block. If after uninstalling it, and you find replication now works, well there you have it. At that point, you’ll need to contact your antivirus vendor to ask them the best way to configure it to allow AD communications and replication.

If it’s not your antivirus or security app, and disabling the Windows firewall doesn’t do the trick, then it’s obvious it’s an outside factor – your edge/perimeter firewalls.

Also to point out, when testing for port blocks, tools such as telnet is not a good tool to test AD/DC to DC connectivity, nor is any sort of standard port scan, such as using nmap, or a simple ping, resolving with nslookup (although resolving required records is a pre-requisite), or other tools. The only reliable test is using Microsoft’s PortQry, which tests specific AD ports and the ephemeral ports, and the required responses from the services on the required AD ports it specifically scans for.

AD through a NAT? Nope. Period.

Oh, and don’t expect to get this to work through a NAT. NATs cannot translate the encrypted RPC traffic therefore bonking LDAP communications.

Description of Support boundaries for Active Directory over NAT
http://support.microsoft.com/kb/978772

How to configure RPC dynamic port allocation to work with firewalls”
AD communications won’t work through a NAT port translation, such as you cannot use DCOM through a NAT firewall that performs address translation (e.g. where a client connects to virtual address 198.252.145.1, which the firewall maps transparently to the server’s actual internal IP address of, say, 192.100.81.101). This is because DCOM stores raw IP addresses in the interface marshaling packets and if the client cannot connect to the address specified in the packet, it will not work.”
Quoted from: http://support.microsoft.com/kb/154596/en-us

Windows 2000 NAT Does Not Translate Netlogon Traffic (this applies to all DCs)
Quoted: “Windows 2000 NAT does not support Netlogon and translate Kerberos. If you have clients that are located behind a Windows 2000-based NAT server and need access to domain resources, consider creating a Routing and Remote Access virtual private network (VPN) tunnel for Netlogon traffic, or upgrade the clients to Windows 2000.”
Quoted from: http://support.microsoft.com/kb/263293

*

Ok, let’s find out if the ports are being blocked

Now you’re thinking that your network infrastructure engineers know what they’re doing and opened up the necessary ports, so you’re thinking, this can’t be the reason? or is it? Well, let’s find out. We can use PortQry to test it. And no, you don’t want to use ping, nslookup, nmap or any other port scanner, because they’re not designed to query the necessary AD ports to see if they are responding or not.

So let’s run PortQry:

First, download it:

       PortQryUI – GUI – Version 2.0 8/2/2004
       http://www.microsoft.com/download/en/details.aspx?id=24009

Then run the “Domains & Trusts” option between DCs, or between DCs and any machine (other servers you want to promote, or even from a client machine), or from the bridgeheads in each site to the other bridgehead in the other site., pretty much anywhere that you want to test if there are any blocked AD ports.

The point is, you’ll want to run it in any scenario where a DC must communicate to another DC or to a client.

If you get any errors with “NOTLISTENING,” 0x00000001, and 0x00000002, that means there is a port block. Take note on which ports they are.

You can ignore UDP 389 and UDP 88 messages. If you see TCP 42 errors, that just means WINS is not running on the target server.

PortQry References

Knock Knock Is That Port Open?
By Mark Morowczynski [MSFT] 18 Apr 2011, Quick tutorial about PortQry GUI version.
http://blogs.technet.com/b/markmoro/archive/2011/04/18/knock-knock-is-that-port-open.aspx

“At times you may see errors such as The RPC server is unavailable or There are no more endpoints available from the endpoint mapper …”
http://blogs.technet.com/b/askds/archive/2009/01/22/using-portqry-for-troubleshooting.aspx

How to use Portqry to troubleshoot Active Directory connectivity issues
http://support.microsoft.com/kb/816103

If you want to use the command line only version:

Download details: PortQry Command Line Only Port Scanner Version 2.0
http://www.microsoft.com/downloads/en/details.aspx?familyid=89811747-c74b-4638-a2d5-ac828bdc6983&displaylang=en

Understanding portqry and the command’s output: New features and functionality in PortQry version 2.0
http://support.microsoft.com/kb/832919

Description of the Portqry.exe command-line utility
http://support.microsoft.com/kb/310099

Portqry Remarks
http://technet.microsoft.com/en-us/library/cc759580(WS.10).aspx

*

DC to DC and DC to client communications Require Numerous ports

There’s no secret to this. That’s the simplest I can put it.

And, the list of ports required is long, to the dismay of network infrastructure engineering teams that must bequest ports to allow AD to communicate, replicate, etc., these ports must be opened. There really isn’t much that can be done otherwise.

Here’s the list with an explanation of each port:

Protocol and Port
AD and AD DS Usage Type of traffic 
TCP 25 Replication SMTP
TCP 42 If using WINS in a domain trust scenario offering NetBIOS resolution WINS
TCP 135 Replication RPC, EPM
TCP 137 NetBIOS Name resolution NetBIOS Name resolution
TCP 139 User and Computer Authentication, Replication DFSN, NetBIOS Session Service, NetLogon
TCP and UDP 389 Directory, Replication, User and Computer Authentication, Group Policy, Trusts LDAP
TCP 636 Directory, Replication, User and Computer Authentication, Group Policy, Trusts LDAP SSL
TCP 3268 Directory, Replication, User and Computer Authentication, Group Policy, Trusts LDAP GC
TCP 3269 Directory, Replication, User and Computer Authentication, Group Policy, Trusts LDAP GC SSL
TCP and UDP 88 User and Computer Authentication, Forest Level Trusts Kerberos
TCP and UDP 53 User and Computer Authentication, Name Resolution, Trusts DNS
TCP and UDP 445 Replication, User and Computer Authentication, Group Policy, Trusts SMB, CIFS, SMB2, DFSN, LSARPC, NbtSS, NetLogonR, SamR, SrvSvc
TCP 9389 AD DS Web Services SOAP
TCP 5722 File Replication RPC, DFSR (SYSVOL)
TCP and UDP 464 Replication, User and Computer Authentication, Trusts Kerberos change/set password
     
UDP 123 Windows Time, Trusts Windows Time
UDP 137  User and Computer Authentication NetLogon, NetBIOS Name Resolution
UDP 138 DFS, Group Policy, NetBIOS Netlogon, Browsing DFSN, NetLogon, NetBIOS Datagram Service
UDP 67 and UDP 2535 DHCP (Note: DHCP is not a core AD DS service but these ports may be necessary for other functions besides DHCP, such as WDS) DHCP, MADCAP, PXE

And We Must Never Forget the Ephemeral Ports!!

And most of all, the Ephemeral ports, or also known as the “service response ports,” that are required for communications. These ports are dynamically created for session responses for each client that establishes a session, (no matter what the ‘client’ may be), and not only to Windows, but to Linux and Unix as well.

See below in the references section to find out more on what ‘ephemeral’ means.are used only for that session. Once the session has dissolved, the ports are put back into the pool for reuse. This applies not only to Windows, but to Linux, Unix and other operating systems, as well. See below in the references section to find out more on what ‘ephemeral’ means.

The following chart shows what the ephemeral ports are depending on the OS version, and what they are used for.

Window 2003, Windows XP, and Windows 2000

TCP & UDP

1024-5000 Ephemeral Dynamic Service Response Ports
Windows 2008/Vista and newer TCP & UDP 49152-65535 Ephemeral Dynamic Service Response Ports
TCP Dynamic Ephemeral Replication, User and Computer Authentication, Group Policy, Trusts RPC, DCOM, EPM, DRSUAPI, NetLogonR, SamR, FRS
UDP Dynamic Ephemeral Group Policy DCOM, RPC, EPM

If the scenario is a Mixed-Mode NT4 & Active Directory scenario with NT4 BDCs, then the following must be opened:

TCP & UDP 1024 – 65535 NT4 BDC to Windows 2000 or newer Domain controller PDC-E communications RPC, LSA RPC, LDAP, LDAP SSL, LDAP GC, LDAP GC SSL, DNS, Kerberos, SMB

See, wasn’t that simple?

 

The Short list without port explanations:

Protocol Port
TCP 25
TCP 42
TCP 135
TCP 137
TCP 139
TCP and UDP 389
TCP 636
TCP 3268
TCP 3269
TCP and UDP 88
TCP and UDP 53
TCP and UDP 445
TCP 9389
TCP 5722
TCP and UDP 464
UDP 123
UDP 137
UDP 138
UDP 67
UDP 2535
TCP & UDP 1024-5000
TCP & UDP 49152-65535

If the scenario is a Mixed-Mode NT4 & Active Directory scenario with NT4 BDC:

The following Ephemeral ports must be opened (yes, it’s pretty much the whole range):

TCP & UDP 1024-65535

*

Restricting Ports Across a Firewall

You also have the ability to restrict DC to DC replication traffic, and DC to client communications, to a specific ports. Keep in mind, it also depends on what ports and services you’ll want to restrict. When choosing this option, you must specify the correct ports for the correct service.

It depends on what ports and services you want to restrict?

1. Method 1

This is to used to set the specific AD replication port. By default it uses dynamic port to replicate data from DC in one site to another.

This is applicable for restriction AD replication to a specific port range.

Procedure:  Modify registry to select a static port.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NTDS\Parameters
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters

Restricting Active Directory replication traffic and client RPC traffic to a specific port
 http://support.microsoft.com/kb/224196

2. Method 2

This is for configuring the port range(s) in the Windows Firewall.

Netsh – use the following examples to set a starting port range, and number of ports after it to use

netsh int ipv4 set dynamicport tcp start=10000 num=1000
netsh int ipv4 set dynamicport udp start=10000 num=1000

The default dynamic port range for TCP/IP has changed in Windows Vista and in Windows Server 2008
http://support.microsoft.com/kb/929851

3. Modify the registry

This is for Windows services communications. It also affects AD communications.
HKEY_LOCAL_MACHINE\Software\Microsoft\Rpc

How to configure RPC dynamic port allocation to work with firewalls
 http://support.microsoft.com/kb/154596/en-us

Here are some related links to restricting AD replication ports.

Reference thread:
http://social.technet.microsoft.com/Forums/en-US/winserverDS/thread/76e8654a-fbba-49af-b6d6-e8d9d127bf03/

RODC Firewall Port Requirements
http://technet.microsoft.com/en-us/library/dd772723(WS.10).aspx

Active Directory Replication over Firewalls
http://technet.microsoft.com/en-us/library/bb727063.aspx

 

RODC – “Read only Domain Controllers” have their own port requirements

Traffic
Type of Traffic
UDP 53 DNS DNS
TCP 53 DNS DNS
TCP 135  RPC, EPM
TCP Static 53248  FRsRpc
TCP 389  LDAP

TCP and UDP Dynamic
1025 – 5000
Windows 2000, Windows 2003, Windows XP Ephemeral Ports
TCP and UDP Dynamic 49152 – 65535 Windows 2008, Windows Vista and all newer operating systems Ephemeral Ports

Designing RODCs in the Perimeter Network
http://technet.microsoft.com/en-us/library/dd728028(WS.10).aspx

Restricting Active Directory replication traffic and client RPC traffic to a specific port
http://support.microsoft.com/kb/224196

Good discussion on RODC and firewall ports required:
http://forums.techarena.in/active-directory/1303925.htm

Further info on how RODC authentication works will help understand the ports:
Understanding “Read Only Domain Controller” authentication
http://blogs.technet.com/b/askds/archive/2008/01/18/understanding-read-only-domain-controller-authentication.aspx

 

References

How to configure a firewall for domains and trusts
http://support.microsoft.com/kb/179442

Active Directory and Active Directory Domain Services Port Requirements, Updated: June 18, 2009 (includes updated new ephemeral ports for Windows Vista/2008 and newer). This also discusses RODC port requirements. You must also make sure the ephemeral ports are opened. They are:
   TCP & UDP 1025-5000
   TCP & UDP 49152-65535
http://technet.microsoft.com/en-us/library/dd772723(WS.10).aspx

Windows 2008, 2008 R2, Vista and Windows 7 Ephemeral Port range has changed from the ports used by Windows 2003 Windows XP, and Windows 2000. Default ephemeral (Random service dynamic response ports) are UDP 1024 – 65535 (See KB179442 below), but for Vista and Windows 2008 it’s different. Their default start port range is UDP 49152 to UDP 65535 (see KB929851 below).

Quoted from KB929851 (link posted below): “To comply with Internet Assigned Numbers Authority (IANA) recommendations, Microsoft has increased the dynamic client port range for outgoing connections in Windows Vista and in Windows Server 2008. The new default start port is 49152, and the default end port is 65535. This is a change from the configuration of earlier versions of Microsoft Windows that used a default port range of 1025 through 5000.”

Windows Vista, Windows 7, Windows 2008 and Windows 2008 R2 Service Response Ports (ephemeral ports) have changed.
http://support.microsoft.com/?kbid=929851

Active Directory and Firewall Ports – I found it hard to find a definitive list on the internet for what ports needed opening for Active Directory to replication between Firewalls. …
http://geekswithblogs.net/TSCustomiser/archive/2007/05/09/112357.aspx

Active Directory Replication over Firewalls, Jan 31, 2006. (includes older pre-Windows Vista/2008 ephemeral ports)
http://technet.microsoft.com/en-us/library/bb727063.aspx

How Domains and Forests Work
Also shows a list of ports needed.
http://technet.microsoft.com/en-us/library/cc783351(v=ws.10).aspx

Paul Bergson’s Blog on AD Replication and Firewall Ports
http://www.pbbergs.com/windows/articles/FirewallReplication.html

 

Exchange DS Access ports

Configuring an Intranet Firewall for Exchange 2003, April 14, 2006.
Protocol ports required for the intranet firewall and ports required for Active Directory and Kerberos communications
http://technet.microsoft.com/en-us/library/bb125069.aspx

 

Additional Reading

Restricting Active Directory replication traffic and client RPC …Restricting Active Directory replication traffic and client RPC traffic to a … unique port, and you restart the Netlogon service on the domain controller. …
http://support.microsoft.com/kb/224196

How to restrict FRS replication traffic to a specific static port – How to restrict FRS replication traffic to a specific static port … Windows 2000-based domain controllers and servers use FRS to replicate system policy …
http://support.microsoft.com/kb/319553

Some firewalls may reject network traffic that originates from Windows Server 2003 Service Pack 1-based or Windows Vista-based computers
This KB indicates Checkpoint firewalls having an issue with AD communications.
http://support.microsoft.com/?kbid=899148

 

 

Checkpoint Firewall and AD, DNS and RPC Communications and Replication traffic

Checkpoint firewalls have a known issue if you are running version R55 or older. You will need to make a registry entry to allows traffic to flow between the 2 sites via the vpn. The preferred solution is to upgrade the Checkpoint firewall.

More info:

Some firewalls may reject network traffic that originates from Windows Server 2003 Service Pack 1-based or Windows Vista-based computers
(This link relates to and helps resolve the Checkpoint issue)
http://support.microsoft.com/?kbid=899148

Note from one poster on the internet with a Checkpoint firewall:
For Windows 2003 R2 and non-R2 remote domain controller we added the Server2003NegotiateDisable entry in
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Rpc

 

 

I know you’ve enjoyed reading this.

Well, whether you did or not, at least you now know what to do to make it work.

Comments, suggestions and corrections are welcomed!

==================================================================

Summary

I hope this helps!

Original Publication Date: 11/1/2011
Updated 11/4/2014

Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP – Directory Services

clip_image00262 clip_image00462 clip_image00662 clip_image00862 clip_image01062 clip_image01262 clip_image01462

Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php

This posting is provided AS-IS with no warranties or guarantees and confers no rights.