Windows 7 – Page 32 – Windows Blog by Brink

Windows 7

How to Use Malicious Software Removal Tool in Windows

The Microsoft Windows Malicious Software Removal Tool (MSRT) helps remove malicious software from your computers that are running Windows 10 Technical Preview, Windows 8.1, Windows Server 2012 R2, Windows 8, Windows Server 2012, Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, or Windows XP.

The Microsoft Malicious Software Removal Tool does not replace an antivirus product. It is strictly a post-infection removal tool. Therefore, we strongly recommend that you install and use an up-to-date antivirus product. If you like, Windows 10 already has Windows Defender included for antivirus.

The Microsoft Malicious Software Removal Tool differs from an antivirus product in three key ways:

•The tool removes malicious software from an already-infected computer. Antivirus products block malicious software from running on a computer. It is significantly more desirable to block malicious software from running on a computer than to remove it after infection.
•The tool removes only specific prevalent malicious software. Specific prevalent malicious software is a small subset of all the malicious software that exists today.
•The tool focuses on the detection and removal of active malicious software. Active malicious software is malicious software that is currently running on the computer. The tool cannot remove malicious software that is not running. However, an antivirus product can perform this task.

This tutorial will show you how to open and use the Malicious Software Removal Tool (MSRT) to scan and remove specific prevalent malicious software in Windows.

Read more…

How to Add or Remove Internet Explorer in Power Options in Windows

The JavaScript Timer Frequency setting under the Internet Explorer power option can slow down the java script animations and execution in Internet Explorer which in turn can save battery life. If you want faster browsing in Internet Explorer, then you might want to change this setting to “maximum performance” in power settings. Slower performance is a compromise to save battery life. By default, when using a PC on battery, Internet Explorer will automatically switch to “maximum power savings” for JavaScript Timer Frequency.

This tutorial will show you how to add or remove Internet Explorer and it’s sub ‘JavaScript Timer Frequency’ setting in Power Options for all users in Windows 7, 8, and 10.

Reaed more…

How to Dual Boot Windows 10 with Windows 7 or Windows 8

Windows Technical Preview is here today, but it’s a long way from done. We’re going to make it faster, better, more fun at parties…you get the idea. Join the Windows Insider Program to make sure you get all the new features that are on the way. If you’re okay with a moving target and don’t want to miss out on the latest stuff, keep reading. Technical Preview could be just your thing.

This tutorial will show you step by step on how to dual-boot Windows 10 Technical Preview with Windows 7 or Windows 8.

Read more…

How to Turn On or Off On-Screen Keyboard Click Sound in Windows

Instead of relying on the physical keyboard to type and enter data, you can use On-Screen Keyboard. On-Screen Keyboard displays a visual keyboard with all the standard keys. You can select keys using the mouse or another pointing device, or you can use a single key or group of keys to cycle through the keys on the screen.

This tutorial will show you how to turn on or off to have the On-Screen Keyboard make an audible click sound when a key is pressed in Vista, Windows 7, and Windows 8.

Read more…

How to Uninstall Drivers in Windows 7 and Windows 8

After a device is installed, it might be necessary to uninstall a device or a driver package. For example, you might decide to replace the associated device, or the driver package might have to be uninstalled when a driver is updated.

The driver store is a protected area of the computer that contains device driver packages that have been approved for installation on the computer. After the driver package has been removed from the driver store, it is no longer available to be installed on a device.

This tutorial will show you how to uninstall a driver for a device in Windows 7 and Windows 8.

Read more…

How to Add or Remove Wireless Adapter Settings “Power Saving Mode” in Windows

The “Power Saving Mode” option under the Wireless Adapter Settings section is used to configure how much power you want to save when using your wireless network card. There are four types of power saving modes available: Maximum Performance, Low, Medium and Maximum Power Saving. Your wireless network performance goes down with higher power savings. For example, choosing “Maximum Power Saving” will cause your wireless network connection to function at lower speeds.

This tutorial will show you how to add or remove “Power Saving Mode” under Wireless Adapter Settings in Power Options for all users in Vista, Windows 7, and Windows 8.

Read more…

How to Backup and Restore All Windows Firewall Settings

Windows Firewall is software that checks information coming from the Internet or a network, and then either blocks it or allows it to pass through to your computer, depending on your firewall settings.

This tutorial will show you how to backup and restore all the Advanced settings, Allowed apps, notification settings, and on/off setting for Windows Firewall in Vista, Windows 7, and Windows 8.

Read more…

How to Add or Remove “Hibernate after” in Power Options in Windows

Hibernation is a power-saving state designed primarily for laptops. While sleep puts your work and settings in memory and draws a small amount of power, hibernation puts your open documents and programs on your hard disk, and then turns off your computer. Of all the power-saving states in Windows, hibernation uses the least amount of power. On a laptop, use hibernation when you know that you won’t use your laptop for an extended period and won’t have an opportunity to charge the battery during that time.

The Hibernate after power option allows users to specify how long in minutes the computer is inactive when on battery or plugged in before automatically hibernating.

This tutorial will show you how to add or remove the “Hibernate after” setting under Sleep in Power Options for all users in Vista, Windows 7, and Windows 8.

Read more…

How to Find the BIOS and UEFI Firmware Version in Windows

BIOS is a program built into personal computers that starts the operating system when you turn on your computer. It is also referred to as system firmware. BIOS is part of your computer’s hardware and is separate from Windows.

UEFI (Unified Extensible Firmware Interface) is a standard firmware interface for PCs, designed to replace BIOS (basic input/output system). This standard was created by over 140 technology companies as part of the UEFI consortium, including Microsoft. It’s designed to improve software interoperability and address limitations of BIOS.

This tutorial will show you different ways to find out what the current BIOS and UEFI firmware version is for your motherboard in Vista, Windows 7, and Windows 8.

This could be helpful to see if you have the latest BIOS or UEFI firmware version installed.

Read more…

How to Add or Remove Desktop Background “Slide Show” in Power Options in Windows

You can have a slide show (a rotating series of pictures) as your desktop background. You can use your own pictures or pictures that Windows provides as part of a theme.

The Slide show power option allows users to specify when they want the desktop background slide show to be available or paused when on battery or plugged in.

This tutorial will show you how to add or remove the “Slide show” setting under Desktop background settings in Power Options for all users in Windows 7 and Windows 8.

Read more…

Windows Media Player (WMP) is updated from time to time with new features and performance enhancements. You can let the Player check for updates automatically or you can check for updates manually.

This tutorial will show you how to manually check for updates in Windows Media Player.

Read more…

How to Enable or Disable Automatic Restart on System Failure in Windows

Whenever a critical error (ex: BSOD) is detected in Windows, Windows will restart itself by default to prevent any possible damage to your computer as a safety measure. The problem is that the error message on the screen only display on the screen very briefly (less than a second) before the PC restarts. If you turn off automatic restart on system failure, you will have time to read and write down the error message to help when troubleshooting.

This tutorial will show you how to enable or disable an automatic restart of your computer on system failure in Vista, Windows 7, and Windows 8.

Read more…