Mathias Olausson [MVP]

Archive for the ‘13219’ Category

Testing for Continuous Delivery with Visual Studio 2012

without comments

Microsoft Patterns and Practices just release a new "blue book”, this time covering many testing practices using Visual Studio ALM 2012 as the foundation. The book has a nice scenario-oriented approach with good practical examples to get you started.


The book is available for free and can be downloaded here:

Written by Mathias Olausson

October 21st, 2012 at 3:12 am

Using Visual Studio 2012 Lab Manager to Create a Build Lab in the Sky

with 3 comments

Since TFS first came out it has been easy to create an automated build solution based on the TFS services. With Visual Studio 2010 it also became easier to create an on-premises continuous deployment solution using the new Lab Management component in TFS.

With Visual Studio 2012 there are several improvments which further improves the build-deploy-test scenarios together with the introduction of hosted TFS services for those interested in a cloud based ALM solution.

Recently Microsoft announced a very sleek solution to enable continuous integration to Azure using the hosted Team Foundation Service. Mike Fourie has written about Using Continuous Deployment to Azure with Team Foundation Service that is a great start if you are interested in Azure deployment.

But what about projects not using Azure? It sure sounds nice to have the option to host the entire development infrastructure in the cloud. So in this post I want to show how we can use the new features in Visual Studio 2012 to build a complete continuous deployment solution using Visual Studio 2012 and cloud services.

The Design

The image below illustrates the environment I would like to create to support a continuous deployment scenario in the sky for a generic application:


  • The Team Foundation Service ( is used to manage code and build assets.
  • Windows Azure is used to host virtual machines that we compose to a test lab.
  • Microsoft Test Manager (MTM) is used to create lab environments and to run tests on the lab environment in Azure.
  • The Hosted Build Service runs the builds, including the lab management builds.
  • As part of the lab management build process the hosted build controller will deploy a build to the test lab and run automated tests on the lab.

So the questions now is how much work is needed to get this up and running? Let’s go and implement the core components of this vision and see for ourselves!

Configure Team Foundation Service

The Team Foundation Service is TFS in the cloud. It’s currently available for free in a preview form but the service has been running for a while now and is very stable. Go to to read more about the service and to create an account.

Since the Team Foundation Service is a hosted service the configuration we need to make is minimal for our scenario, just create an account, create a project and add the code.

Configuring a Build Service

A build service is currenty an integrated part of every Team Foundation Service account. This may of course change once the service is commercially available but for now it’s there for free.

Brian Harry has a great post that describes how to setup and use the hosted build service here:

This means we don’t have to do anything to get builds working with the Team Foundation Service.

Create Lab Machines in Windows Azure

So with the TFS infrastructure solved we now need to create a lab machine (or more) to run our tests on. For this example I created a simple Windows Azure worker role and enabled remote desktop in order to be able to log on to the machine to configure it and to install additional software as needed.

For information on how to create a Windows Azure machine and to configure it for RDP the following resources can be useful:

Configuring a Test Controller

The Team Foundation Service comes with an integrated build service but unfortunately not a test controller. We need a test controller to be able to setup a Visual Studio 2012 Lab Environment and also to control the test runs in the remote environment.

We can install the test controller wherever we want as long as it can access TFS and the lab machines. A simple solution for this scenario is to install the Test Controller on the lab machine itself. I used RDP to connect to the VM and then downloaded and installed the Test Agent directly on the Azure machine.

Note: It’s generally not recommended to install the Test Controller inside a Lab Management environment so you should setup a dedicated machine for this purpose.

The setup is simple but in order to use it with the Team Foundation Service we of course need to connect it the the TFS collection. But we also need to authenticate using an account that has been setup to access the TFS service, therefore I’ve used my local account from the Azure VM to both run the test controller service and as the lab service account:

TC config

Create a Visual Studio 2012 Standard Lab Environment

Visual Studio 2012 has a great enhancement to the way we create Lab Management envioronments; it is not required to install the System Center Virtual Machine Manager to create a lab instead we can build one from any physical or virtual machine. So in this case we will create a lab environment from the Azure VM created earlier.

With the test controller configured as described in the previous step we can now use MTM and create a new environment. The most interesting parts for our scenario is the Machines tab where we specify the Azure machines (getting the hostname for the VM is probably the most challenging part) and also an account on the VM that has permissions to configure the environment.


The next interesting configuration is the Advanced tab. Here we need to specify the test controller the environment should be connected to. We can also configure the environment to run UI tests and if so provide the account the test agent should be run under.


Completing the wizard will then start the environment creation process which can take some time. The most time consuming part is when the Visual Studio Test Agent gets installed but after a while the machine should be in a ready state:

lab ready

Take a look at the following guide if you want more information on how to setup a Lab Management environment with Azure machines: How to get VS11 Lab Management to work with Azure VM Roles and Azure Connect.

Create a Build

Next we need to create a TFS build to compile a version of our project that we can deploy to our test lab and use for testing. Setting up a TFS build to create a deployment package can be very simple or quite a challenge depending on what kind of application we have.

We will just assume we have a TFS build called ExpenseIT Dev that creates a deployment package for us. The build has only one different thing in the hosted build scenario and ther is where the build is dropped. With the hosted build service we can choose to drop the build in TFS, something that makes sense in a cloud scenario where we don’t have access to a file share.

lab wf build default

If you want to learn more about creating automated builds with TFS 2012 then The Visual Studio ALM Rangers TFS Build Customization Guide is a great resource.

Create a Test Suite for Automated Testing

Continuous Deployment requires more than just an automated build and deployment process to work. We also need a way to verify that the deployment actually works and what better than to do so by using automated tests built into the process?!

We can implement these build verification tests (BVT) using any automated tests. We can then add the tests to a test suite in Microsoft Test Manager and use that test suite later in the automated deployment workflow, the image below shows how we have created a test suite called ExpenseIT:


If we open the test case we can see that it is an automated test that is associated with the CreateStandardExpenseReport method in the ExpenseIT.UITests.dll assembly:


Create a Build-Deploy-Test Build Workflow

Now we are ready to do what we were aiming to do; create a continuous deployment solution using cloud services. Visual Studio 2012 Lab Management has a build template to setup a build-deploy-test workflow in a simple way using the

First we create a new build definition using the LabDefaultTemplate11.xaml process template.


On the Process tab we just select the LabDefaultTemplace.11.xaml build process template:


Next we edit the Lab Process Settings using the Lab Workflow wizard. The first step is to select the Azure Lab environment we created for this scenario:


Next we specify which build to deploy. We use the ExpenseIT Dev build and use the <Latest> available build.

Note: we cannot Queue a new build option together with the hosted build service because currently we are only assigned one build agent per account. The logic in the LabDefaultTemplate11.xaml build template is to queue a new build and wait for it to complete before running the deploy and test stages. With only one agent this workflow will be blocked and eventually timeout.


In the Deploy tab we get to add scripts to run locally on each machine in the environment:


In our case the deployment is very simple. just an xcopy of the build result and we’re done. So the deploy.cmd script contains the logic to clean the existing deployment folder and then xcopy over the build result:

SET DeploymentPath=%2
RD %DeploymentPath% /S /Q
XCOPY %1 %DeploymentPath% /S /Y /I

Finally we select a test suite containing the automated tests to run on the environment, in our case the ExpenseIT suite in the ExpenseIT test plan:


That’s it! We have now set up a complete build-deploy-test workflow using only hosted services!

To test the BDT workflow we just make sure we have a build to deploy (the ExpenseIT Dev build) and then queue a new build.

If this had been setup on-premises with a build drop on a file share the BDT process could access all would have worked just fine. But having the drop folder in TFS unfortunately causes the deploy and test steps to fail:


As we can see in the build report the application sees the drop folder from the build to deploy in TFS but the activities in the lab workflow doesn’t know how to handle that and instead treats it as a local folder.

So to fix this we need to customize the BDT workflow to download the build result so the workflow can find it and use it as expected.

Customizing the BDT Workflow

To customize the default BDT workflow we just make a copy of it and open up the workflow in Visual Studio. If you want to learn how to customize a build template see the TFS Build Customization Guide.

First we will change the deploy and test activites to use a configurable location to find the build result. Then we can extend the deployment script to first download the build result to TFS before performing the deployment tasks.

We add a custom argument to the process to be able to specify the LabDropFolder from the build definition:


To show the configuration argument in a proper way in the build definition we add it as metadata in the process parameter metadata editor:


Next we find the “Run Deployment Task” activity and change the BuildLocation to the LabDropFolder:


And then the “Running Tests” activity and set the TestDirectory to the LabDropFolder:


Now we checkin the customized lab build template to TFS and update our deployment build definition to use the new template including specifying a Lab drop folder (on the Azure VM in this case):


With the build definition using the new build template all that remains is to update the deployment script to download the build result from TFS to a folder on the lab machine. The following script does just this. First we clean the target folders, then create a temporary TFS workspace and download the build result there. Finally the build result files are copied over to the deployment folder and the workspace is removed.

Echo off
SET DeploymentPath=%2
RD %DeploymentPath% /S /Q
RD c:\temp\drop /S /Q
CD c:\Temp
MD drop
tf workspace /new Temp /collection: /noprompt
tf get %1 /recursive
REM — Deploy App
XXCOPY drop %DeploymentPath% /S /Y /I
tf workspace /delete Temp /noprompt

With this we can now queue a new build and this time the entire build-deploy-test workflow will succeed since the deploy and test activities in the workflow are now using a local directory for the build result:


That’s it! You have now seen how you can use Visual Studio 2012 with the hosted TFS and Build Service together with Windows Azure VMs to create a complete build lab in the sky.

Written by Mathias Olausson

July 20th, 2012 at 3:02 pm

Posted in 13219,16410,16693,17177

ALM Rangers Visual Studio Lab Management Guide

without comments

Today I’m happy to bring news about the beta release of the Visual Studio Lab Management guide, second edition. I’ve been working with this project since the beginning and this time around I’ve had the opportunity to lead the work for this release. It’s been great fun to work with an active product owner from the Lab Management product group and of course a committed and knowledgeable team!

This time around the focus has been around the new features coming in Visual Studio 11 Lab Management, the document has been revised to reflect that content. We have also spent a significant amount of time to add content to support the build-deploy-test workflow in TFS and Lab Management. This work includes

  • Guidance on lab process template customization
  • Guidance on how to implement a continuous integration process using lab management
  • Guidance on database deployment
  • Guidance on SharePoint deployment
  • Hands-on lab on Lab Management 11 Standard Environments
  • Custom Lab Activities (included in the TFS Build Extensions project)

Take a look at the beta release here: and give us feedback on things you like as well as things you’re missing!

Written by Mathias Olausson

March 6th, 2012 at 3:45 pm

Posted in 13219,16891

Community TFS Build Extensions – December 2011

without comments

We’ve just released a new release of the Community TFS Build Extensions.

This time it’s a pretty big release many new activities as well as a new power-tool, the Community TFS Build Manager. I will come back to the Build Manager later but here’s a sneak-peek at what it looks like:


In short it’s a Visual Studio extension that allows you to things you can’t to in the regular Build Explorer, such as batch updating build definitions and clone a build definition to a branch.

I’ll write more about the goodies in this release in a later post.

Written by Mathias Olausson

December 22nd, 2011 at 5:15 pm

Posted in 11561,12010,13219

September release of TFS Build Extensions

without comments

The second release of the TFS Build Extensions is out! This release contains a new activity for running Silverlight tests as part of a build, an significantly improved VsDevEnv activity and a number of minor improvements and fixes.

Richard Fennell has done a great job on documenting some of the activities in this release, I’ll try to do the same for the ones I’ve contributed with.

In the the next release we plan to add more support for deployment (Azure, Sharepoint) and Lab Management. This is also driven my the coming updates to the ALM Rangers project for Build and Lab Management.

Written by Mathias Olausson

September 27th, 2011 at 2:11 pm

Posted in 12010,13219,16373

ALM Rangers Lab Management Guide v1 Released!

without comments

This week there’s been lots of celebration for the Visual Studio ALM Rangers! Today the project site for the Lab Management Guide went live, which is really exciting. Now there’s finally a comprehensive document available that describes the many details of using the TFS Lab Management tools. Having worked with the project and the product for a good while I’m really happy to see this guidance come out.

So head over to the Rangers Lab Management Guide at Codeplex and take a look!

The v1 release contains the following:

The content is packaged in 3 separate zip files to give you the choice of selective downloads. The default download is the first of the listed packages:

  • Guidance, which includes scenario based practical guidance and frequently asked questions.

  • Hands-on Labs (HOL), which includes the HOL documents that provide walkthroughs of the technology, based on the guidance

  • HOL Package, which includes a HOL environment setup package which allows you to setup the HOL environment in your own environment

The Epics included in the guidance are:

  • Epic – Visualisation of the guidance using quick reference posters
  • Epic – Advanced golden image management using the VM Factory for Lab Management
  • Epic – Provide guidance on setting up Test environments with respect to pre-defined personas
  • Epic – Provide Guidance to enable large and small teams to setup and configure both automated and manual tests
  • Epic – Provide practical guidance for managing and maintaining a Lab Management environment
  • Epic – Provide practical guidance to enable teams to quickly setup and configure their lab management environment

Written by Mathias Olausson

June 18th, 2011 at 3:31 pm

Posted in 11561,12010,13219

Lab Management (pre-release) 2010 Walkthrough VHD

without comments

The Visual Studio Lab Management team has released an updated virtual machine with the latest bits for testing out the Lab Management capabilities. The setup of lab management can be pretty involved so this is a great way to get to test the product in a quick and easy way!

See the following blog post for more details on what’s included in the demo image and what to need to do to get your environment up and running:

Download to the VHD:

If you prefer to use the Free Download Manager to batch download the files then Steve St Jean has created a list of the URLs to use:

Written by Mathias Olausson

July 11th, 2010 at 2:17 pm

Posted in 11561,12010,13219

Visual Studio Lab Management 2010 RC Walkthrough VHD

without comments

Visual Studio Lab Management is a new component in the VS 2010 and TFS 2010 stack aimed to simplify management of test environments. Being a pre-v1 product and also a solution to a complex problem it has been a challenge to set up and get a test lab running.

Last week Microsoft released a pre-configured VHD will everything you need to try out the new product installed. So for those interested in testing this new product this is a great starting point.

You will need a physical machine running Windows Server 2008 R2 and Hyper-V to host the Lab Management VHD. I recommend you have at least 8GB of RAM and a large, fast disk for the virtual machines.

Download the image here.

And there’s a very detailed walkthrough for setting up the environment and running a couple of fundamental scenarios in this blog post.

So give the VHD a try, I think you will like it!

Written by Mathias Olausson

March 5th, 2010 at 2:24 pm

Posted in 11561,12010,13219